Friday 27 November 2020

Insulating your Home in the Best Way

Oil and gas are becoming increasingly scarce, and the cost of heating your home goes one way and then goes up.

The first step is to explore the best ways to keep this expensive home heating inside.

But first, if you can afford it, consider having a specialist check your home, who can detect and measure where heat is flowing and which openings need to be closed. You need to turn on some heating to stay warm; you should explore all the heat storage options you generate and pay for. The writer lives in a country where temperatures have dropped to -17 degrees Celsius over the past two winters. For many homes, this meant that their heating systems were on most of the night, as well as during the day. As night follows day, payday comes later in the form of excessive heating bills.

To keep warmth in your home, the first thing to look at is the attic roof because most of the heat in your home goes up and, if not insulated, it will go through the roof. A roof loft can be easily insulated by installing relatively inexpensive insulation, commonly called stone wool, that comes in rolls. It is installed between the beams and significantly insulates your home. The thicker the coat, the better the insulation.

insulation

The next largest area for heat dissipation is the outer walls. Almost a third of the heat in your home is said to escape through uninsulated or poorly insulated walls. Some homes have good insulation built in during the construction phase. Unfortunately, millions of homes built before the cost and lack of fuel for heating became a problem with little or no insulation materials installed and highly inefficient.

You have three options for reducing heat loss through walls, namely:

Exterior insulation is a layer of insulation attached to the outside walls of your home. This “skin” can be up to 200mm / 8 “thick and is usually rendered.

Insulated drywall – a layer of insulation glued to the drywall glued to the inside of the walls. A thickness of about 80mm / 3 “is most commonly used and is very effective at keeping your room warm with space in the room, which can be a problem if your room is small.

Suppose you’re on a tight budget or can’t afford to waste room space. In that case, the cheapest insulation method is insulating paint, a well-established recent innovation that’s applied like any emulsion/latex for interior wall decoration and actually on the ceiling. If you can use a brush or roller, you can apply the insulating paint yourself, which means many savings. Retail for top brands is enough for two layers in a small room. insulation melbourne paint is undoubtedly the most economical way to prevent heat from escaping through the walls and ceiling of your home.

 

Share